To install home depot indoor outdoor carpet, the first is measure the boat. You’ll probably want to add at least 6 “in both directions to make sure you have enough to work with. Measure the sides of the walls and any cabinets that also get blankets. Once you have measured, complete a detailed diagram of to help you decide how much you need. Indoor outdoor carpet usually comes in 6 and 12 foot widths. If you can get past 6 ‘pieces, this is ideal, but you may need to order a 12’ piece.
Second, some of the big box stores can carry a pair of rolls of home depot indoor outdoor carpet in stock. Most of the other carpet shops have to order a piece for you. Make sure you also order the right type of carpet for outdoor use. Third, remove old carpet your boat will probably have some blanket already installed on it. It’s typically glued down very well and it will require some scratching on your part. Take your scraper and come first around the edges of the rug.
It can help put a little bit of water under the edges while scratching to help release the glue. Make sure the area is clean and free from glue when done. Wipe it with a cloth to make sure it is slippery. Last, spread the adhesive on the boat. Make sure there is plenty of glue over the entire surface. Put the home depot indoor outdoor carpet down in the glue and press it firmly. Trim around the edges with your knife until you have a good fit. Take a roll or something heavy and roll over the top of the rug to make sure the rug is down well. Then let the job sit and dry for about 24 hours.